toggle high contrast
EN
UA
Oil and
gas services
In 2023, DTEK Oil&Gas established its own service unit as a response to the shortage of high-tech oil and gas services after the start of the full-scale war.
Currently, these services cover not only the company's internal needs but are also offered to the external market. All service lines are primarily focused on technological capabilities. The use of the latest technologies has always been a competitive advantage of DTEK Oil&Gas as a production business. The same principle is being applied to the service unit.
Our services
Drilling
Equipment:
- Bentec 450 t drilling rig
- Drillmec 318 t drilling rig
- TD-200 225 t drilling rig
Advantages:
- Each unit is equipped with a top drive system.
- Each drilling rig has a drilling mud system capacity exceeding 420 m³, equipped with a Derrick cleaning system, Bentec and Drillmec pumps.
- Accelerated drilling by use of OptiDrill and Vertical Scout technologies.
- Fully staffed drilling crews; key personnel are certified to the international IWCF standard (level 3–4).
Contact us
Seismic exploration
Equipment:
- 30,000 nodes of the STRYDE wireless telemetry system
- 8,000 cable channels with power and control systems
- 1 seismic station Sercel 428XL
- 5 seismic vibrators Sercel Nomad 65 Neo
Advantages:
- STRYDE is the world's most compact nodal technology, capable to record signals from 1 Hz.
- Ability to perform high-density surveys even in hard-to-reach areas.
- Low-frequency excitation from 1.5 Hz using customised sweep signals.
Contact us
Coiled tubing, Nitrogen and Pumping services
Equipment:
- Fidmash Coiled Tubing Units — 2 pcs.
- A-100 nitrogen units with a capacity of up to 85 m³/min and a pressure up to 700 atm — 3 pcs.
- H-504 pumping units with a flow rate up to 730 l/min and a pressure up to 700 atm — 3 pcs.
- Separation equipment for well workovers.
- Liquid nitrogen storage terminal with a capacity of 122 tonnes.
Advantages:
- Capability to perform operations in wells over 6,000 m deep.
- Full-cycle services — from modelling to well commissioning.
- Expert engineering assessment and selection of optimal technical and economic solutions.
- Engineering support with process modelling using Cerberus software.
- Ready to start work within 24 hours after receiving an order.
Contact us
Hydraulic fracturing (Fracking)
Equipment:
- Pump units (6 pcs) — pressure up to 15,000 PSI, flow rate up to 5.0 m³/min
- Hydration unit — capacity up to 7.5 m³/min
- Blender — capacity up to 11.5 m³/min
- Proppant supply system — up to 100 t/operation
- Thermal tank fleet — 1000 m³
- Control and management station — recording and visualisation of all parameters
- Water heating unit — thermal power up to 4.7 MW
Advantages:
- Fracking fleet on all-terrain chassis provides access to difficult locations.
- Thermal tanks with a capacity of 1,000 m³ maintain a stable fluid temperature under winter conditions.
- Complex compositions are used for temperatures above 140 °C.
Contact us
VSP (Vertical seismic profiling)
Equipment:
- 13 probes with payload
- 2 telemetry modules
- 2 gamma instruments
- 1 mobile laboratory
Advantages:
- Ability to operate in H₂S environment.
- Capability to conduct Walkaway and Walkabove VSP surveys.
Contact us
Slickline
Equipment:
- Landline D Double Drums (NOV) cable hoist in a container design on a high-clearance chassis
- Complete set of blowout prevention equipment
- Downhole tools
Advantages:
- Exclusive equipment configuration.
- Capability to operate in high-pressure wells.
- High operational responsiveness.
Contact us
Contacts: